How to Use a Jar Top Corn Stripper
By Microplane | Published: 2026-10-20
Category: How-to Guides
Learn how to use a jar top corn stripper to remove corn kernels quickly and cleanly, with step-by-step instructions and common mistakes to avoid.
Quick Answer
To use a jar top corn stripper, place the tool over the top of a jar, insert the cob, and press down while twisting to remove kernels cleanly into the jar.
Why Use a Jar Top Corn Stripper?
Using a jar top corn stripper is a mess-free way to remove corn kernels from the cob. Unlike using a knife, which can be dangerous and messy, this tool collects the kernels directly into a jar, making it easy to store or use immediately.
The tool is designed to fit over the top of a jar, so you can strip kernels directly into the container. This is especially useful when you need to preserve corn for later use or want to avoid scattering kernels across your counter.
Choosing the Right Corn
For best results, use fresh corn on the cob. The kernels should be plump and juicy, but not overripe. Overripe corn may have tougher kernels that are harder to strip, while underripe corn may not release cleanly.
If you are using frozen or cooked corn, the kernels may be softer and more prone to breaking. For a clean strip, fresh, raw corn is ideal.
Step-by-Step Guide to Using a Jar Top Corn Stripper
- Prepare the Corn: Shuck the corn and remove all silk. Rinse the cob under running water to remove any remaining silk or debris. Pat dry with a clean towel. Ensure the cob is dry to prevent slipping.
- Position the Stripper on a Jar: Place the jar top corn stripper over the mouth of a wide-mouth jar. Make sure it sits securely and evenly. A secure fit prevents the tool from wobbling during use.
- Insert the Cob: Hold the corn cob vertically and insert the pointed end into the center of the stripper's opening. The cob should fit snugly. If the cob is too thick, it may be difficult to insert; choose a smaller ear or trim the ends.
- Press and Twist: Apply firm, even pressure downward while twisting the cob. The blades will slice the kernels off, and they will fall into the jar. Do not rock the cob side-to-side; this can break the blades or leave kernels behind.
- Check for Remaining Kernels: After stripping, inspect the cob for any missed kernels. Rotate the cob and repeat the press-and-twist motion if needed. A few kernels may remain near the tip; you can use a knife to remove them if desired.
The Tool We Recommend
- Jar Top Corn Stripper - Black: The Microplane Jar Top Corn Stripper is crafted from premium stainless steel for lasting durability and precise performance. This means the tool will reliably strip kernels without bending or dulling, giving you clean results every time.
Jar Top Corn Stripper - Black
